ATEIS IDA8C - Manual (Page 442)

Ateis Studio 442
© 2012 ATEÏS
Flash
This button to make a 3-way calling, During the connection of first remote phone, press this
button, then dial the number of second remote, if second remote accept the call, press Flash
again.
Level
Adjust the level of transmitting audio.
Delay key define
Define the key for delay. For some telephone systems, it need to dial 0 for an outside line then
dial required number. Between 0 and outside phone number, it requires a short delay. In such
case, you can define digit "#" for a delay, the number to dial should be "0#XXXXXXXXXX" where X
is the outside phone number you want to call.
Delay Time
Set the delay time for an delay digit.
6.25.2 TC Receive
Component Template
Component Appearance
Description
This component receive telephone call and detect DTMF tone output logic signal response to the
key pressing on remote telephone. It need to work with telephone card hardware. The pins on the
bottom side of component output the DTMF status.