ATEIS IDA8C - Manual (Page 107)

Product Features 107
© 2012 ATEÏS
4.1.6.8 Tone Settings
In the lower part of window [Monitoring(Matrix Mode)-IDA8C/S X ], There is a page [Tone Settings] for
configuring tone signal which is utilized for monitoring. There are two kind of settings:
Zones with 0dB
If audio signal from Amplifier Zone Output is not go back IDA8C/S for monitoring, It allow user to mix
a tone into that signal for further detection. You can change this setting in [Zone Settings] tab and
[Mode] field. There are parameters of settings:
Zone
Indicate zone number of parameters.
Mute
To mute tone signal.
Level(dB)
The level of tone signal.
Frequency(Hz)
The frequency of tone signal.
Zones with 100V
Frequency
The frequency of tone signal.
Enable 1K Tone