ATEIS IDA8C - Manual (Page 434)

Ateis Studio 434
© 2012 ATEÏS
This LED light up if the signal of input channel greater than Overload Thd.
Volume
Meter showing the channel RMS level.
Signal
Indicates audio signal presence above -30 dB from chosen 'Sensitivity'.
Level
Signal output level of the channel.
Overload Thd.
A threshold value to determine signal of a channel is overload or not.
6.22.2 RS485 Output
Component Template
Component Appearance
Description
This component control the RS485 output signals parameters and monitor it. The output component
represent the physical analogue inputs accessible on the 485 port of the Audio Processor. There are
A~D four ports represent for different channel of 485 port. Some consoles like PSS AS it transfer
audio signal via PDC port which is RS485 interface. To output audio signal via RS485 port, you need
to create RS485 output component in design window.
Control Window