ATEIS IDA8C - Manual (Page 358)

Ateis Studio 358
© 2012 ATEÏS
Description
Control the input signals parameters and monitor it. The analogue input modules represent the
physical analogue inputs accessible on the rear panel of the Audio Processor. There are several
separate modules for use with each of the audio board slots. Analogue input and output modules are
added automatically to the DSP window of the relevant processor by defining their module
configuration at the time you create them and should not be altered.
Control Window
Element Properties
Name Initial Minimum Maximum Precision Unit
Bypass Off - - - -
Mute Off - - - -
Sensitivity 0dB - - - -
Phantom Power Off - - - -
RTO Off - - - -
Overload Off - - - -
Volume -50.0 -50.0 20.0 todo dB
Signal Off - - - -
Level 0 -60.0 20.0 0.1 dB