AMETEK i-iX Series II User Manual
Page 29
User Manual
California Instruments
i Series II / iX Series II / iM Series II
29
provided on CD ROM CIC496.
-AMD
Airbus AMD24C Test software (refer to Avionics Software Manual
P/N 4994-971 for details)..
Note: Requires use of CIGuiSII Windows application software
provided on CD ROM CIC496.
-EOS1 / -EOS3
Electronic output switch for IEC 61000-4-11 testing. Includes –411
firmware option. Single or three phase versions. (i/iX Only)
-LAN
Adds Ethernet interface (RJ45 connector) for local area network
connection. (Available on P/N 7000-485 and 7000-486 models only).
-LF
Limits maximum output frequency to 500 Hz.
-FC
Sweep the output frequency to ±0.25% of program value
- LNS
Line sync option to synchronize output frequency to input mains
line frequency
-MODE-iX
Available for 9003iX and 15003iX configurations only. Switches
output configurations between single-phase and three-phase
mode of operation. Note that programmable impedance function
on systems with –MODE-iX option is only available when in 3
phase mode.
- RMS
Rack mounting kit with slides. Removable rack ears/handles
standard.
Lumped Impedances
Available in different power levels and no. of phases as listed.
-OMNI-1-18i
Single phase lumped reference impedance network of IEC1000-3-
3 Flicker test
-OMNI-1-37i
Single phase lumped reference impedance network of IEC1000-3-
3 Flicker test – High current.
-OMNI-3-18i
Three phase lumped reference impedance network of IEC1000-3-
3 Flicker test
-OMNI-3-37i
Three phase lumped reference impedance network of IEC1000-3-
3 Flicker test – High current.
Accessories
Description
-TI
Function strobe break out box. Function strobe / Trigger Output
connection break out box. Provides BNC output with internal 9Vdc
pull up for connection to external equipment such as oscilloscope.
Compatible with 3001i/iX and 5001i/iX. Refer to section 3.6.7.
-TIS
Function strobe break out box for systems. Function strobe /
Trigger Output connection break out box. Provides BNC output
with internal 9Vdc pull up for connection to external equipment
such as oscilloscope. Compatible with multi-chassis i/iX Series
configurations. Refer to section 3.6.7.
2.7 Supplemental Specifications
Supplemental specifications are not warranted and generally reflect typical performance
characteristics. These characteristics have been checked on a type test basis only and are not
verified on each unit shipped. They are provided for reference only.