Manual, Lynx 4s layout (cont.) – HITEC Lynx 4S User Manual

Page 8

MANUAL:

SECTION 1

A. Programming Buttons:
Main Dial: Use the main dial to scroll through menu options or to change the value of programmable functions.

LYNX 4S Layout (cont.)

[Scroll] [Short Click] [Long Click]

Scroll:

Move through all function and display menus. When a function with user-specified values
(TEMP, VOLT, SPEED, etc.) is highlighted, use the scroll feature of the Main Dial to view the
range of possible values for that function.

Short Click:

Select the menu or set value.

Long Click:

Revert to the original default set value by holding down the Main Dial for a one second count.

Adjust the servo horn or use the S-TRIM set-up feature if your R/C model fails to drive in a straight line even after
programming the trim to its max setting.

Note

Tip

Tip

C. Dial D1 / D2:
Through the fast dial control of the Lynx 4S, you can adjust set-up values quickly for 22 different functions. For
more details, please refer to Page 38.
D. Steering Tension Adjustment:
For the convenience of the user, you can adjust the steering tension on your Lynx 4S steering wheel to your
preference with the use of a 1. 5mm hex wrench. To stiffen the resistance of the steering wheel, turn the
wrench clockwise. To make the tension of the steering wheel smoother, turn the wrench counterclockwise.
E. Brake Limiter:
For the convenience of the user, you can adjust the brake’s maximum travel range to your preference with the
use of a 2.5mm hex wrench. To shorten the brake’s travel range, turn your wrench clockwise. To lengthen the
brake’s travel range, turn your wrench counterclockwise.

Please review and adjust as necessary the set-up values for neutral servo position, throttle, EPA, EXP and so on
whenever you alter the brake’s travel range.

Note

Tip

Tip

F. Steering Wheel:
Control the direction of the model.