HITEC Lynx 4S - Manual (Page 27)

MANUAL:
SECTION 2
P27
BOOST (Auto Boost)
Quick start is not suitable under slippery road conditions. In conditions prone to tire spin, the BOOST
function creates a smoother acceleration.
USE: Indicates whether the BOOST function is ON or OFF [default: OFF].
MAX: sets the timer to automatically turn OFF the BOOST function [default: 5s]. (This setting is only
maintained when the throttle trigger is at 100%)
TG.P: The point at which the BOOST power starts [default: 10%].
PW.P: The power settings under which the BOOST function is operating [default: 100%].
1. Press the Main Dial button to view the function menu.
2. Select BOOST under the SET 2/2 tab by using the Main Dial’s scroll and click functions.
3. Press the Main Dial button to select the channel.
4. The BOOST function automatically shuts OFF after use.
5. You may check the status of the BOOST setting on the graph located on the home screen.
ST-SPD may be adjusted by external switch. Please refer to Page 37 for details.
Note
Tip Tip
Tip
ST-SPD Setting Display Crawler MIX Function on Main Display
S T-SPD (Steering Servo Speed)
ST-SPD sets the speed for the clockwise/ counterclockwise movement of the servo. It allows for more stable
driving conditions for the vehicle on the road.
1. Press the Main Dial button to access the function menu.
2. Select SP-SPD under the SET 2/2 tab.
3. Press the Main Dial button to select the channel.
4. Note that lower speed corresponds to a lower set value.
5. The maximum speed cannot be set to exceed the original speed of the servo. Likewise, slower operation
does not affect the speed of the servo.
BOOST Setting Display BOOST Function on Main Display