HITEC Lynx 4S - Manual (Page 31)

MANUAL:
SECTION 2
P31
Lap Timer
MODE: Select the desired timer function.
ALARM: Set the target alarm time.
PRE: Set a pre-alarm notification. For example, setting a 35 second pre-alarm will sound a warning 35 seconds
before your start time.
TR: Activates the timer by moving the throttle trigger.
READY: Clicking Ready will start the timer.
RESET: Resets the timer.
1. Press the Main Dial button to access the function menu.
2. Select ‘Timer’ under the SET 2/2 tab.
3. Set up the timer function suitable to your needs.
4. Timer will start when you click ‘READY’ or pull the throttle trigger.
Allows the user to view details of each lap. To view all laps, go to the Lap List.
Each lap can be stored by assigning a ‘TIMER CAPTURE’ switch. Refer to Page 37 for more details.
Note
Tip Tip
Tip
Lap List (Lap Time Listings)
The lap list stores average and individual lap times for later viewing.
No Data: There is no LAP data available at this time.
AVG: Average lap time.
ALL: Total run time.