HITEC Lynx 4S - Manual (Page 29)

MANUAL:
SECTION 2
P29
IDL-UP (Idle Up/Down)
The user has the option to adjust the engine’s idling parameters. You can prevent idling during vehicle refuel, or
you can assign an idling period when you brake.
TH: When the TH function is ON, range of activation can be set [Range: B50 / OFF / H50].
MAX: When the MAX function is ON, the IDLE UP time frame can be set. [Range: OFF / 1-60secs]
When the set time has elapsed, the function will shut off automatically.
Timer (Race Timer)
Allows the user to monitor relevant clock speeds like total run time, refuel time, and fastest lap time.
MODE: Select the desired timer function.
ALARM: Set the target alarm time.
PRE: Set a pre-alarm notification. For example, setting a 35 second pre-alarm will sound a warning 35 seconds
before your start time.
TR: Activates the timer by moving the throttle trigger.
READY: Clicking Ready will start the timer.
RESET: Resets the timer.
1. Press the Main Dial button to access the function menu.
2. Select ‘Timer’ under the SET 2/2 tab.
3. Set up the timer function suitable to your needs.
4. Timer will start when you click ‘READY’ or pull the throttle trigger.
1. Press the Main Dial button to enter the function menu.
2. Select IDLE UP under the SET 2/2 tab.
3. Select the IDLE UP value suitable for your needs.
When IDLE UP is activated, its ON status is visible via a blinking LED light on-screen.
Note
Tip Tip
Tip