Receiver installation, Manual – HITEC Lynx 4S User Manual
Page 16
P16
MANUAL:
SECTION 1
Receiver Installation
Sponge Pad
Double-Sided Tape
WARNING
You can protect the receiver’s antenna by encasing them in rubber tubing.
Do not bend the antenna.
Do not cut the antenna.
Do not use broken antenna.
Please install receivers away from batteries, motors, ESCs or engines that generate noise. The receiver’s antenna are
especially susceptible to audio interference.
Note
Tip
Tip
Tip
Receivers depend on sensitive technology. Do not expose your receiver to jarring vibrations, shock, or dust.
Remember to take appropriate measures, like using sponge pads or thick, double-sided tape, to insulate your
receiver against damaging forces. Do not bend or cut the ends of the 2.4GHz RX’s antenna wire. Please refer
to the picture below for the proper installation method.
- MD10 (32 pages)
- S60 (39 pages)
- Hawkeye (2 pages)
- Sky Scout (KIT) (28 pages)
- Sky Scout (2GO) (32 pages)
- eHawkeye (8 pages)
- Extra 300S (12 pages)
- Warbirds - F4U Corsair (16 pages)
- Zipper (8 pages)
- Blizzard (16 pages)
- DogFighter (40 pages)
- Easy Glider Pro (52 pages)
- Easy Glider Pro (RR) (2 pages)
- Easy Star II (56 pages)
- FunCub (16 pages)
- Funman (52 pages)
- FunJet Ultra (32 pages)
- Gemini (40 pages)
- ParkMaster 3D (40 pages)
- Pilatus PC-6 Turbo Porter (12 pages)
- Razzor (56 pages)
- Shark (48 pages)
- Solius (60 pages)
- StuntMaster (24 pages)
- Tucan (64 pages)
- Twin Star II (40 pages)
- EasyCub (44 pages)
- Easy Star (32 pages)
- Easy Star (RR) (2 pages)
- Easy Star (Ready to Fly) (44 pages)
- FunCopter (64 pages)
- FunCopter V2 (64 pages)
- FunJet (32 pages)
- Mentor (48 pages)
- Mentor (RR) (2 pages)
- Merlin (40 pages)
- MiniMag (RR) (52 pages)
- Twister (32 pages)
- Xeno (32 pages)
- Q-Cop 450 (16 pages)
- Aurora 9X (144 pages)
- Flash 7 (102 pages)
- Eclipse 7 Pro (66 pages)
- Optic 6 Sport 2.4 (30 pages)
- Optic 5 2.4 (24 pages)