HITEC Lynx 4S - Manual (Page 53)

MANUAL:
SECTION 5
P53
SD Import (SD Card Model Import)
Model data that has been saved to the SD card can be imported to your transmitter.
1. Press the Main Dial button to access the function menu.
2. Select ‘SD-IMPORT’ under the MODEL tab (SD-MODEL).
3. Select the model that you want to import from the SD card.
The current model data in the transmitter will be deleted.
Note
Tip Tip
Tip
SD Export (SD Card Model Export)
Model data stored in the transmitter can be exported to the SD card.
The current model data on the SD card will be deleted.
Note
Tip Tip
Tip
1. Press the Main Dial button to access the function menu.
2. Select ‘SD-EXPORT’ under the MODEL tab (SD-MODEL).
3. Select the model that you want to export to the SD card.
To prevent an error from occurring, please do not remove the SD card when using this function.
Note
Tip Tip
Tip
To prevent an error from occurring, please do not remove the SD card when using this function.
Note
Tip Tip
Tip