HITEC Lynx 4S - Manual (Page 39)

MANUAL:
SECTION 3
P39
ST-ADJ (Steering Adjustments)
1. Press the Main Dial button to access the function menu.
2. Select ‘ST-ADJ’ under the SYSTEM tab.
3. Turn the steering wheel left or right to adjust the corresponding values. A reading of “0 OK” represents Center.
4. If you have an OK marker on the screen, press OK to save.
Use this function when a mechanical steering offset has occurred.
Once ST-ADJ is complete, please double check the throttle setup to ensure proper operation.
Note
Tip Tip
Tip
Before After
TH-ADJ (Throttle Adjustments)
1. Press the Main Dial button to access the function menu.
2. Select ‘TH-ADJ’ under the SYSTEM tab.
3. Press the throttle trigger to adjust the values on-screen. A reading of “0 OK” represents neutral.
4. If you have an OK marker on the screen, press OK to save.
Use this function to tweak your throttle setting.
Once TH-ADJ is complete, please double check the throttle setup to ensure proper operation.
Note
Tip Tip
Tip
Before After