HITEC Lynx 4S - Manual (Page 28)

P28
MANUAL:
SECTION 2
TH-SPD (Throttle Servo Speed)
TH-SPD enables the user to set the momentum connected to the throttle servo or ESC. It allows for more
stable driving control under different road conditions.
1. TH-SPD has four mode settings.
2. Press the Main Dial button to enter the function menu.
3. Select TH-SPD on the SET 2/2 tab by using the Main Dial button’s scroll and click function.
4. Press the Main Dial button to select the channel.
5. Note that a lower speed corresponds to a lower value setting.
6. The maximum speed cannot be set to exceed the original speed of the servo. Likewise, slower operation
does not affect the speed of the servo.
TH-SPD may be adjusted by external switch. Please refer to Page 37 for details.
Note
Tip Tip
Tip
TH-MOD (Throttle Mode)
The R.E.V. function enables the user to adjust servo direction with changes to steering, throttle, and
maneuvering the 3CH and 4CH models (settings are either clockwise or counterclockwise).
1. Press the Main Dial button to enter the function menu.
2. Select TH-MOD on the SET 2/2 tab.
3. Select the target setup by clicking the Main Dial button.
Please disconnect the motor from the ESC to disable the Nitro /Gas engine before adjusting TH MODE.
Note
Tip Tip
Tip