HITEC Lynx 4S - Manual (Page 52)

P52
MANUAL:
SECTION 5
SD-Name (SD Card Model Naming)
30 additional model names can be stored with the use of an SD card.
1. Press the Main Dial button to access the function menu.
2. Select ‘SD-NAME’ under the MODEL tab (SD-MODEL).
3. Change the setting by using the on-screen keyboard.
To prevent an error from occurring, please do not remove the SD card when using this function.
Note
Tip Tip
Tip
SD Delete (SD Card Model Delete)
Users can clear the SD Card of any stored model data.
1. Press the Main Dial button to access the function menu.
2. Select ‘SD-DELETE’ under the MODEL tab (SD-MODEL).
3. Select the model you wish to delete.
The active model cannot be deleted. You will need to activate a different model before selecting the model you want to delete.
Note
Tip Tip
Tip
To prevent an error from occurring, please do not remove the SD card when using this function.
Note
Tip Tip
Tip