HITEC Lynx 4S - Manual (Page 49)

MANUAL:
SECTION 3
P49
Vibration
The Lynx 4S has a built-in vibration motor, which can be activated to issue driving and noise warnings.
1. Press the Main Dial button to access the function menu.
2. Select ‘VIBRATION’ under the SYSTEM tab.
3. Highlight and then click the function to turn it on or off as desired.
When the vibration function is on, the sound function automatically turns off in order to save the speaker’s sound quality.
Note
Tip Tip
Tip
1. Press the Main Dial to access the function menu.
2. Select ‘BATTERY’ under the SYSTEM tab.
3. Choose the desired item and change the setting by Main Dial.
Battery (Battery Type Settings)
The Lynx 4S includes a Ni-MH battery and can be used with a Ni-CD, Li-Po, or Li-Fe battery. When the type of
battery is changed, the Lynx 4S will automatically manage the new voltage system as shown below.
Be sure to set the correct battery type. If the wrong battery type is defined, damage to the battery may occur.
Note
Tip Tip
Tip