HITEC Lynx 4S - Manual (Page 10)

P10
MANUAL:
SECTION 1
O. LED Lamp:
The LED Lamp has a lighting scheme of six different colors that indicate a corresponding status of your Lynx 4S.
P. 3-Position Slide Switch SW1:
With a 3-Position switch, you can adjust the set-up value for 4 different Lynx 4S functions.
This switch is especially useful for Crawler models or those models with individual wheel control.
Q. Speaker:
The built-in speaker emits telemetry voice data and music audio.
R. Throttle Trigger:
The throttle trigger determines forward and reverse acceleration as well as brake control.
S. Throttle Tension Adjustment:
Users are able to adjust throttle tension with a 1.5 mm hex wrench. To create stiffer tension in the
throttle, insert and turn the wrench clockwise. To create a smoother throttle tension, turn the wrench
counterclockwise.
Battery Port and Micro SD Card Port:
Li-Fe, Li-Po, Ni-MH and Ni-CD batteries are supported with your Lynx 4S battery port. By inserting a micro
SD card, you can play music and telemetry voice data or expand the memory capacity for up to 30 models.
LYNX 4S Layout cont.
This battery port is designed to work with batteries of opposing polarity.
Note
Tip Tip
Tip