AMT Datasouth Performax - Manual (Page 55)

4-1
The following shows how profiles can be named and how features may be programmed to suit the
particular application.
For example, to change from printing reports to checks, simply press the Off Line key, the Profile
Select key (2 times), and the On Line key. Load the appropriate forms (checks) and you are ready
to print.
For an application that is not stored in a profile, call up the profile whose features most closely
match the application and reprogram only the features requiring change. These changes will not
alter the profile's permanent settings unless you save them when you exit setup mode.
Secondary Key Functions
To change features, press the Setup key to enter setup mode and the “Secondary Key Functions”
are in operation. The illustration below shows the secondary keys and their respective functions.
Note that in setup mode, the keys operate according to the legend encircling the key, not the legend
printed on the key.
A brief description of each key function follows: