AMT Datasouth Performax - Manual (Page 42)

5 . This adjustment is automatically saved in memory for the current profile and will be applied
the next time forms are loaded.
Tear Off Adjustment
The printer can be used in demand document application. A tear off distance is set so the forms
come to rest as shown when the Tear Off key is pressed. When the forms are in this position, the
last printed form may be removed by pulling the perforation against the tear edge of the cover.
The distance the forms move when the Tear Off key is pressed is called the tear distance. If the
perforation does not come to rest at the tear edge, the tear off distance may be adjusted as follows:
1. Load forms as described under Bottom Feed Path in this chapter.
2. Perform Top-of-Form Adjustment in this chapter.
3. Press the Tear Off key. The form should move up to the current tear location.
4. Using the Adjust key or the Adjust key, move the paper until the perforation is located at
the tear bar.
5. Press the Tear Off key. The form will return to the current print position. This adjustment is
automatically saved in memory for the current profile and will be applied when forms are
reloaded.
2-11
Form Thickness Adjustment