AMT Datasouth Performax - Manual (Page 32)

Recommended Types, Sizes and Weights
CAUTION
IMPROPER MARGIN SETTINGS CAN LEAD TO PRINTHEAD DAMAGE!!
DO NOT PRINT OVER TRACTOR HOLES OR OFF PAPER EDGE.
Continuous Forms
Width - 3 to 15 inches
Individual Pan Thickness - .005 inch maximum
Total Form Thickness - .021 inch maximum
Number of Copies - original plus 5 copies
Individual parts of a multi-part should not exceed .005 inches without factory approval. Carbonless
forms over 4 parts by factory approval only.
Single Part Cut Sheets
Width - up to 17 inches
Length - 5 inch minimum
Weight - 16 to 24 pound bond
Thickness - .003 to .005 inches
Multi-part Cut Sheets
Width - up to 14 inches
Length - 5 inch minimum
Individual Part Thickness - .005 inch maximum
Total Form Thickness - .021 inch maximum
Number of Copies - original plus 5 copies
Individual part of a multi-part form may not exceed .005 inch without factory approval. Carbonless
forms over 4 parts by factory approval only.
2-1
C-Size Drawing Paper
(17 x 22 inches), may be manually fed through the front feed path in portrait orientation only.