8 walk test reporting, 9 walk test duration, 10 walk test nac time out – SilentKnight 5600 User Manual
Page 70: 11 clock source, 12 auto daylight savings time, 13 remote annunciator

Model 5600 Installation and Operation Manual
6-8
151450
the central station. It is defaulted to 3 hours and must be within the range 0-30 hours.
For U.L. 864 installation this option must be set within the range 1-3 hours.
6.6.1.8 Walk Test Reporting
The default configuration for this option is No. If set to Yes, the panel generates a
TEST report to the central station when the walk test begins. During a walk test, the
panel’s normal fire alarm function is completely disabled, placing the panel in a local
trouble condition. All zones respond as 1-Count zones (respond when a single
detector is in alarm) during a walk test. Each alarm initiated during the walk test will
be reported.
6.6.1.9 Walk Test duration
Enter the amount of time, in minutes, for the walk test duration. When the
programmed amount of time expires, the Walk Test will end automatically.
6.6.1.10 Walk Test NAC Time out
Enter the amount of time, in seconds, for the walk test NAC active duration. During a
walk test alarm activation, the NACs will automatically deactivate after the
programmed amount of time expires.
6.6.1.11 Clock Source
The panel’s AC line frequency is selectable for 60 Hz, 50 Hz, or Internal Clock
Source. AC frequency feature dictates how the control panel will calculate time based
on the AC line frequency used in the installation site. The “Internal Clock” option can
be used in areas where the AC line frequency is not dependable and you want the
panel to calculate time from the internal crystal. The internal crystal is not as accurate
as the AC power source. The panel defaults to the 60 HZ selection.
6.6.1.12 Auto Daylight Savings Time
Select this feature to “Yes” if you want the panel to automatically adjust the clock to
track with daylight savings time.
6.6.1.13 Remote Annunciator
Select this feature to “Yes” if a 5635 Remote Annunciator is to be used. A customized
banner can also be added to the Remote Annunciator. The Remote Annunciator
allows for the top 2 lines to be programmed as a custom banner.