SilentKnight 5600 - Manual (Page 17)

151450 2-1
Section 2
Agency Listings, Approvals, and Requirements
Install and maintain in accordance with NFPA 72. Detector spacing shall be in
accordance to NFPA 72. End-of -line relays and resistors shall be placed within the
electrical box located and the end of the initiating circuit. Testing and maintenance
should be performed according to NFPA 72.
2.1 Federal Communications Commission (FCC)
The following information must be provided to the telephone company before the
5600 can be connected to the phone lines:
1. This device may not be directly connected to coin telephone or party line services.
2. This device cannot be adjusted or repaired in the field. In case of trouble with the
device, notify the installing company or return to:
Silent Knight
12 Clintonville Road
Northford, CT 06472-1610
203-484-7161
3. If the 5600 causes harm to the telephone network, the telephone company will
notify the user in advance that temporary discontinuance of service may be
required. If advance notice is not practical, the telephone company will notify the
user as soon as possible. Users have the right to file complaints, if necessary, with
the Federal Communications Commission.
A Manufacturer: Honeywell International Inc.
B Model Number: 5600
C FCC registration number: US: AC6AL05B205600
Ringer equivalence: 0.5B
D Type of jack: RJ31X
E Facility Interface Codes: Loop Start: 02LS2
Ground Start: 02GS2
F Service Order Code: 9.0F