SilentKnight 5600 - Manual (Page 18)

Model 5600 Installation and Operation Manual
2-2 151450
4. The telephone company may make changes in its facilities, equipment, opera-
tions, or procedures that could affect the operation of the equipment. If this hap-
pens, the telephone company will provide advance notice to allow you to make
the necessary modifications to maintain uninterrupted service.
a) This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the wiring diagram of this equipment is a label that
contains, among other information, a product identifier in the format US:
AC6AL05B-205600. If requested, this number must be provided to the telephone
company.
b) See Section 4.8 for phone jack information.
c) A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
d) The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. For products approved after July 23, 2002, the REN for this product is
part of the product identifier that has the format US: AC6AL05B-205600. The
digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.
e) If this equipment 5600 causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may
be required. But if advance notice isn't practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
f) The telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
g) If trouble is experienced with this equipment 5600, for repair or warranty
information, please contact Silent Knight. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
h) See warranty in back of this manual for repair and replacement information.
Warning
This device has been verified to comply with FCC Rules Part 15. Operation is subject to the following
conditions: (1) This device may not cause radio interference, and (2) This device must accept any inter-
ference received, including interference that may cause undesired operation.