RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 24)

COPYRIGHT © 2014 RED.COM, INC
RED 3-AXIS SYSTEM OPERATION GUIDE
955-0044, REV-D | 24
W.M.D. MAIN MENU
The W.M.D. home screen displays the following system information for convenient user access:
Lock status icon
Wireless power setting icon
‒ H: Wireless power set to High
‒ L: Wireless power set to Low
Currently selected lens profile
‒ White: Designates a default profile
‒ Yellow: Designates a modified AND saved User profile
‒ Red: Designates a modified profile that has not been saved
When changes are made to these W.M.D. main menu settings, they automatically update on the home screen.
AUTO-LOCK FEATURE
The W.M.D. features a menu lock function to prevent inadvertent changes to system settings. When locked, the
lock status indicator is displayed in the upper left corner of the W.M.D. home screen.
The W.M.D. automatically locks after 60 seconds of non-use. Press the A button from any W.M.D. menu to lock
the W.M.D. and return to the home screen.
UNLOCK THE W.M.D.
When the W.M.D. is locked, only the A button remains active. Unlock the W.M.D. to return to the main menu.
Press and hold the A button for two (2) seconds to unlock W.M.D.
W.M.D. BUTTON LOCK
In the W.M.D. Options menu, the Button Lock feature provides the user with the ability to disable the auto-lock
feature when a menu time-out occurs. When the lock is disabled, the user no longer has to hold the A button
for two (2) seconds to unlock the unit. Regardless of the setting, pressing the A button will lock the W.M.D.
Disable the auto-lock in the W.M.D. menu, under Options > Button Lock.
CONFIGURE FOCUS, IRIS, AND ZOOM MOTORS
After initializing the W.M.D. with a Lens Control Motor, you may need to adjust the following settings:
Torque
Direction
Type/Model
Backlash
Endstop
ADJUST TORQUE
Keep the torque setting as low as possible to avoid damaging the lens and lens motors. Increase the torque
setting if the motor does not successfully initialize or an error message is displayed.
1. In the W.M.D. main menu, select the desired motor. (Example: Focus, Iris, Zoom)
2. Select Torque.
3. Press Select to cycle through to the desired torque setting. (Example: Low, Medium, High)