RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 15)

RED 3-AXIS SYSTEM OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0044, REV-D | 15
CONFIGURE LENS CONTROL MOTORS
The W.M.D. features a number of adjustments in the Focus, Iris, and Zoom menu topics to fine-tune specific
motor/lens combinations. After initializing the system, you may need to adjust the following settings:
Torque
Direction
Type/Model
Backlash
Endstop
NOTE: For more information, go to “Configure Focus, Iris, and Zoom Motors” on page 24 .
METADATA AND LENS PROFILES
The microSD slot on the W.M.D. is used to update firmware, as well as save and share modified lens profiles
that allow you to view real-time metadata on the W.M.D. This guide offers information on the following topics:
Select a Lens Profile
Modify a Lens Profile
Clear the Active Lens Profile
View Lens Metadata
Export Lens Profiles
Import Lens Profiles
NOTE: For more information, go to “W.M.D. Lens Profiles” on page 28 .
LENS LIMITS AND LENS LOCKS
The T.H.C. features several convenient and easy-to-use features for precision wireless control. This guide offers
information on the following topics:
Set a Lens Limit
Remove a Lens Limit
Set a Lens Lock
Remove a Lens Lock
NOTE: For more information, go to the chapter “Tactical Hand Controller (T.H.C.)” on page 32 .