CK Electric Part C3000 User Manual
Page 50
Chapter 2
Printing With the MultiPASS C3000 2-25
MPC-3000—USERS MANUAL/V000/07-97
Printing
❍
Slide the paper into the manual feed slot in the back of
the printer.
❍
Make sure the print side is facing up.
❍
Align the sheet with the left edge of the manual feed slot.
❍
Hold the sheet for about two seconds until it feeds
automatically.
❍
The printer will automatically load the paper into
position.
After printing on thick paper or envelopes, set the paper thickness lever
(inside the printer) back to the left or center position before printing on
other paper types.
When you are
prompted, insert
the single sheet.
3
MANU
AL_FEED