CK Electric Part C3000 - Manual (Page 22)

Loading Paper in the Sheet Feeder
The paper you load in the sheet feeder is used for printing documents
or for incoming faxes. For printing documents, you can use any of
the Canon specialty papers described in Chapter 2, Printing With the
MultiPASS C3000. For receiving faxes, use plain paper (such as copier
paper).
When the message LOAD PAPER appears in the LCD display, you need to
add paper to the sheet feeder.
The sheet feeder holds approximately 100 sheets of plain paper.
❍ For best results, fan the paper before loading it.
❍ Always fan a stack of paper along the edge that will feed
into the MultiPASS first.
❍ Pull the paper rest up until it stops. Make sure the
paper rest
is extended.
2
Fan the paper.
1
1-8 Introduction Chapter 1
MPC-3000—USERS MANUAL/V000/07-97
P_REST_UP
F
AN