CK Electric Part C3000 - Manual (Page 191)

9-8 Maintaining the MultiPASS C3000 Chapter 9
BJ Cartridge and BJ Tank Maintenance
The most important thing you can do to extend the life of your
MultiPASS C3000 and to ensure optimum print quality is take
care of the BJ cartridges.
C
Spilled ink can stain any surface. Open BJ cartridges and BJ tanks
carefully, and follow the guidelines presented here to protect against
spilled ink.
❍ If you are using both the BC-21 Color BJ Cartridge and any of the
optional BJ cartridges, make sure you store the cartridge not being
used in the Ink Cartridge Storage Box.
❍ Keep BJ cartridges and BJ tanks in their sealed containers until you
are ready to use them.
❍ Do not remove the BJ tanks from the BC-21 Color BJ Cartridge
unnecessarily. This may cause the ink to clog.
❍ Make sure both BJ tanks are installed in the BC-21 Color
BJ Cartridge. Attempting to use the BC-21 Color BJ Cartridge
with one BJ tank only may cause ink clogging.
❍ If spilled, the ink is difficult to remove. Therefore, it’s a good idea to
keep the BJ cartridges and BJ tanks out of the reach of children.
❍ Do not touch the print head area on the BJ cartridge. Ink may leak
out and cause stains.
C Hold the BJ cartridge on the sides only. Do not touch the silver plate on
the bottom of the BJ cartridge or the silver metal or circuit area on the
side. The metal area may become hot during printing.
Ink Cartridge BCl-21
Made in Japan
Black
Ink Cartridge BCl-21
Made in Japan
Color
Made in Japan Color BJ Cartridge BC-21
PRINT HEAD
MPC-3000—USERS MANUAL/V000/07-97
BC_21_PH
PRINT HEAD
DO NOT TOUCH
HOLD HERE