CK Electric Part C3000 - Manual (Page 247)

G-6 Glossary
M MuullttiiPPAASSSS DDeesskkttoopp M Maannaaggeerr ffoorr W Wiinnddoow wss
Canon’s exclusive software package that allows you to use the
MultiPASS C3000 with your Windows software applications. You must
install the Desktop Manager to use your MultiPASS C3000 as a printer,
scanner, or PC fax.
N Nooiissee
A term applied to a variety of problems that impair the operation of
telephone lines used for faxing.
N Nooiissee lleevveell
See dB(A).
N Noonnbblleeeedd
A special mode in color print quality selection whereby the printer
changes from true black to composite black when directly adjacent to an
area of color.
N Nuum meerriicc bbuuttttoonnss
The round numbered buttons on the operation panel marked the same
as a standard telephone keypad. Press them to perform manual dialing,
to enter numbers and letters when you register numbers and names, and
to enter coded speed dialing codes with two or more digits.
OOnnee--ttoouucchh ssppeeeedd ddiiaalliinngg kkeeyyppaadd
The round buttons numbered 1 to 6 on the operator panel, each of
which may be registered as a fax or telephone number. Once a number is
registered, you press one button to dial the entire number.
PPaaggee oorriieennttaattiioonn
Refers to the direction of print on the page. Printing across the width of
a page is called portrait orientation. Printing across the length of a page
is called landscape orientation.
PPaauussee
A timing entry required for registering certain long distance numbers
and for dialing out through some telephone systems or switchboards.
Pressing the
REDIAL/PAUSE
button enters a pause between digits of a
telephone number.
PPCC ffaaxx
An electronic way to send and receive faxes. A PC fax is sent from or
received directly into a computer. Using the MultiPASS Desktop
Manager you can send and receive PC faxes, and save, sort, and/or print
the PC faxes.
MPC-3000—USERS MANUAL/V000/07-97