CK Electric Part C3000 - Manual (Page 129)

Scanning From a Windows Application
You can use the MultiPASS C3000 to scan documents directly into a
Windows application that supports a TWAIN interface (such as Adobe ®
PageMaker ® ). Some applications allow multiple page scans, while others
do not. If you are unsure whether your Windows application supports
this feature, refer to your user documentation for the application.
The following instructions summarize the procedures for scanning an
image. For specific information about scanning with your Windows
application, refer to the user documentation for the application.
❍ Place the document face down in the ADF.
❍ Normally, you select Acquire and then Select Source from
the File menu. Now you select the MultiPASS.
❍ Then you select Acquire and then Image.
❍ For information on the scan options, see page 6-5.
The scanned image appears in your application.
In the
MultiPASS
Scanner dialog
box, specify the
scan options,
and then
click Scan.
3
In your Windows
application, specify
the MultiPASS as
the scan device.
2
Feed the
document.
1
6-6 Copying and Scanning With the MultiPASS C3000 Chapter 6
MPC-3000—USERS MANUAL/V000/07-97
DTM_SC3.TIF