Ip csg billing – Cisco OL-15491-01 User Manual
Page 46
A-46
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg billing
ip csg billing
To define a CSG2 billing plan, and to enter CSG2 billing configuration mode, use the ip csg billing
command in global configuration mode. To delete the billing plan, use the no form of this command.
ip csg billing billing-plan-name
no ip csg billing billing-plan-name
Syntax Description
Defaults
None
Command Modes
Global configuration
Command History
Usage Guidelines
You can define up to 128 billing plans.
The characteristics of each billing plan are defined by the following commands:
•
•
•
Examples
The following example shows how to define a CSG2 billing plan named REGULAR:
ip csg billing REGULAR
Related Commands
billing-plan-name
Name of the billing plan, which is a set of services. When the CSG2
encounters a new subscriber, the CSG2 retrieves its billing plan.
The name can be from 1 to 64 characters long, and can include uppercase
or lowercase letters (the CSG2 changes all letters to uppercase), numbers,
and any special characters.
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1: None.
Command
Description
Sets the time after which entries for idle subscribers are deleted
from the CSG2 User Table.
Specifies the mode for a CSG2 billing plan.
Associates a service with a CSG2 billing plan.