Cisco OL-15491-01 - Manual (Page 240)

A-240
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
show ip csg
replicate Displays information about only high availability (HA) sessions.
smtp Displays information about only the Simple Mail Transfer Protocol (SMTP)
sessions.
user Displays information about only subscriber sessions.
application (Optional) Displays information about only the specified application:
• ftp—Closes FTP subscriber sessions.
• http—Closes HTTP subscriber sessions.
• imap—Closes IMAP subscriber sessions.
• other—Closes other subscriber sessions.
• pop3—Closes POP3 subscriber sessions.
• rtsp—Closes RTSP subscriber sessions.
• smtp—Closes SMTP subscriber sessions.
• wap—Closes WAP subscriber sessions.
internal (Optional) Displays internal CSG2 data structure information for use in
debugging.
We recommend that you enter this keyword only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers.
ip-address ip-mask (Optional) Displays information about only the specified subscriber IP
address and subscriber IP address mask.
Specify IP address 0.0.0.0 to display information about all subscriber IP
addresses.
Specify IP address mask 0 to display information about all subscriber IP
address masks.
stats Displays performance statistics for the CSG2.
You can also use the following commands to monitor CSG2 high availability
(HA) configurations: show redundancy state, show redundancy interdev,
and show ipc sctp.
users Displays information about subscribers.
Note If the basis second connect command is configured, the balance and
consumed fields in the output of the show ip csg users command are
updated only when there is a Service Reauthorization Request for
new quota.
ip-address ip-mask Displays information about only the specified subscriber IP address and
subscriber IP address mask.
Specify IP address 0.0.0.0 to display information about all subscriber IP
addresses.
Specify IP address mask 0 to display information about all subscriber IP
address masks.
id user-name Displays information about the specified user ID.
all Displays information about all subscribers.
sip Displays information about the Session Initiation Protocol (SIP).