Ip csg ipc retransmit – Cisco OL-15491-01 User Manual
Page 78

A-78
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg ipc retransmit
ip csg ipc retransmit
To define the Interprocessor Communication (IPC) retransmit time interval for the CSG2, use the ip csg
ipc retransmit command in global configuration mode. To reset the IPC retransmit timer to the default
value, use the no form of this command.
ip csg ipc retransmit number-of-seconds
no ip csg ipc retransmit
Syntax Description
Defaults
The default value is 4 second.
Command Modes
Global configuration
Command History
Usage Guidelines
We recommend that you change the retransmit time interval only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most
appropriate setting.
Examples
The following example shows how to specify an IPC retransmit time of 2 seconds:
ip csg ipc retransmit 2
Related Commands
number-of-seconds
Time, in seconds, between IPC retransmits. The range is 1 to 65535. The
default value is 4.
Release
Modification
12.4(11)MD
This command was introduced.
Command
Description
Defines the Billing Mediation Agent (BMA) retransmit time
interval for the CSG2.
Defines the Cisco Persistent Storage Device (PSD) retransmit time
interval for the CSG2.
ip csg quota-server retransmit
Defines the quota server retransmit time interval for the CSG2.