Ip csg refund – Cisco OL-15491-01 User Manual
Page 154
A-154
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg refund
ip csg refund
To specify the CSG2 refund policy to apply to the various services, and to enter CSG2 refund
configuration mode, use the ip csg refund command in global configuration mode. To disable this
feature, use the no form of the command.
ip csg refund refund-policy-name
no ip csg refund refund-policy-name
Syntax Description
Defaults
None
Command Modes
Global configuration
Command History
Usage Guidelines
The characteristics of each policy are defined by the following commands:
•
—The CSG2 supports flag-based refunding for all protocols.
•
—The CSG2 supports return code-based refunding for all protocols except RTSP.
Examples
The following example shows how to specify CSG2 refund policy COMPANY-REFUND:
ip csg refund COMPANY-REFUND
Related Commands
refund-policy-name
Name of the refund policy that applies to the content for this service. The
name can be from 1 to 15 characters long, and can include uppercase or
lowercase letters (the CSG2 changes all letters to uppercase), numbers, and
any special characters.
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1: None.
Command
Description
Specifies IP, TCP, or wireless application protocol (WAP) flag bit masks and values
for CSG2 Prepaid Error Reimbursement.
Defines a policy for qualifying flows for the CSG2 accounting services, and enters
CSG2 policy configuration mode.
Configures a CSG2 content billing service, and enters CSG2 service configuration
mode.
Specifies the range of application return codes for which the CSG2 refunds quota
for Prepaid Error Reimbursement.