Cisco OL-15491-01 - Manual (Page 18)

A-18
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
class
class
To specify a service class value, use the class command in CSG2 service configuration mode. To remove
the service class value, use the no form of this command.
class value
no class value
Syntax Description
Defaults None
Command Modes CSG2 service configuration
Command History
Usage Guidelines The class command is used with fixed-record format to identify a service class value. This value is
opaque to the CSG2 and has meaning only for the administrator. It is reported as tariff-class in
fixed-record format call detail records (CDRs).
Examples The following example specifies a class value for the service:
ip csg service FOO
class 7
Related Commands
value Specifies a value in the range 1 to 255.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: None.
Command Description
ip csg service Configures a CSG2 content billing service, and enters CSG2 service
configuration mode.
ip csg transport-type assign Classifies data traffic on the basis of its access path.
mode Specifies the mode for a CSG2 billing plan.
ip csg records format Specifies variable or fixed CDR format.
owner Specifies an identifier or name for a service owner.