Cisco OL-15491-01 - Manual (Page 255)

A-255
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
show record-storage-module
show record-storage-module
To display information about the record storage module (RSM), use the show record-storage-module
command in privileged EXEC mode.
show record-storage-module {stats | target-info [all | target-profile profile-name] [detail]}
Syntax Description
Command Default No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use the show record-storage-module stats command to display RSM statistics.
Examples The following example shows output from the show record-storage-module stats command:
Router# show record-storage-module stats
RSM Appl Stats:
requests:
open= 1, read= 0, write= 0
ping= 0, close= 0
request fail:
open= 0, read= 0, write= 0
ping= 0, close= 0 | ta
alloc fail:
appl info= 0, appl msg= 0, appl req= 0,
data buffer= 0, drive= 0
RSM Clear:
Statistics = 1
The following example shows output from the show record-storage-module target-info all detail
command:
Router# show record-storage-module target-info all detail
Target profile = TARGET_LINUX
Application name = GGSN, Target State = Active, Disk = Usable
Application id = 2, iSCSI handle = 2
stats Displays current RSM statistics.
target-info Displays the number of RSM disks available, and their current status.
all (Optional) Displays statistics for all targets for which there are
profiles.
target-profile profile-name (Optional) Displays statistics for a specific profile.
detail (Optional) Displays detailed information about the RSM drives.
Release Modification
12.4(15)MD This command was introduced.