Meter exclude pause rtsp – Cisco OL-15491-01 User Manual
Page 192
A-192
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
meter exclude pause rtsp
meter exclude pause rtsp
To exclude the Real Time Streaming Protocol (RTSP) PAUSE time from the CSG2 usage calculation,
use the meter exclude pause rtsp command in CSG2 service configuration mode. To return to the
default behavior, use the no form of the command.
meter exclude pause rtsp
no meter exclude pause rtsp
Syntax Description
This command has no arguments or keywords.
Defaults
The default behavior is to include the RTSP PAUSE time in the usage calculation.
Command Modes
CSG2 service configuration
Command History
Usage Guidelines
You must configure basis second before configuring this command.
Examples
The following example shows how to exclude the RTSP PAUSE time from the usage calculation for the
SERVICE-A service:
ip csg service SERVICE-A
basis second
meter exclude pause rtsp
Related Commands
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1: The meter exclude command split into three new
commands—meter exclude mms wap, meter exclude pause rtsp, and meter
exclude svc-idle.
Command
Description
Configures a CSG2 content billing service, and enters CSG2
service configuration mode.
Excludes call control packets for a Session Initiation Protocol
(SIP) session from the CSG2 usage calculation.
Excludes bytes for a WAP 1.x Multimedia Messaging Service
(MMS) session from the CSG2 usage calculation.
meter exclude network-init sip
Excludes incoming Session Initiation Protocol (SIP) transactions
(that is, those that are initiated from the network) from the CSG2
usage calculation.