Cisco OL-15491-01 User Manual
Page 227

A-227
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
records granularity
Command History
Usage Guidelines
You can use this command to reduce the number of records for services for which transaction-level
billing is not required. For example, if a subscriber is accessing the Internet, and the data is to be billed
based only on volume, then generating records for each HTTP transaction is of little use. With
service-level CDR summarization enabled, the CSG2 generates only consolidated records that contain
service-level usage.
To enable service-level CDR summarization in postpaid mode, you must specify that the associated
billing plan is postpaid by using the mode postpaid command in CSG2 billing configuration mode.
Service-level CDRs are generated only for subscribers with entries in the CSG2 User Table entry. If a
subscriber does not have an entry in the User Table, the CSG2 generates transaction-level CDRs.
Examples
The following example shows how to specify a service granularity in both IP bytes and seconds:
ip csg service A1
records granularity service byte 10000 seconds 120
Related Commands
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1:
•
The time keyword changed to seconds.
•
The range for the seconds argument changed from 60 to 4294967295, to 5 to
86400.
Command
Description
Configures a CSG2 content billing service, and enters CSG2 service
configuration mode.