Ip csg quota-server keepalive – Cisco OL-15491-01 User Manual
Page 106

A-106
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg quota-server keepalive
ip csg quota-server keepalive
To define the quota server keepalive time interval for the CSG2, use the ip csg quota-server keepalive
command in global configuration mode. To reset the quota server keepalive timer to the default value,
use the no form of this command.
ip csg quota-server keepalive number-of-seconds
no ip csg quota-server keepalive
Syntax Description
Defaults
The default value is 60 seconds.
Command Modes
Global configuration
Command History
Usage Guidelines
We recommend that you change the keepalive time interval only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most
appropriate setting.
Examples
The following example shows how to specify a quota server keepalive time of 300 seconds:
ip csg quota-server keepalive 300
Related Commands
number-of-seconds
Time, in seconds, between quota server keepalives. The range is 1 to 65535.
The default value is 60.
Release
Modification
12.4(11)MD
This command was introduced.
Command
Description
Defines the Billing Mediation Agent (BMA) keepalive time interval
for the CSG2.
Defines the Interprocessor Communication (IPC) keepalive time
interval for the CSG2.
Defines the Cisco Persistent Storage Device (PSD) keepalive time
interval for the CSG2.
Configures the CSG2 quota servers that return billing quota values
for subscribers.