Ip csg entries fragment – Cisco OL-15491-01 User Manual
Page 66
A-66
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg entries fragment
ip csg entries fragment
To define the maximum number of entries in the CSG2 fragment database, or to define how long the
CSG2 is to retain the entries, use the ip csg entries fragment command in global configuration mode.
To restore the default settings, use the no form of this command.
ip csg entries fragment {idle duration | maximum entries-number}
no ip csg entries fragment {idle | max}
Syntax Description
Defaults
The default idle duration is 5 seconds.
The default maximum number of entries is 16384.
Command Modes
Global configuration
Command History
Usage Guidelines
The CSG2 divides the configured maximum number of entries evenly among the traffic processors. For
example, if you configure a maximum of 100 entries, the maximum buffer pool size on each traffic
processor is 20.
Examples
The following example shows how to specify a maximum CSG2 fragment database size o0f 32,768
entries:
ip csg entries fragment maximum 32768
Related Commands
idle duration
Number of seconds after which entries are deleted from the CSG2
fragment database. The range is from 1 to 255. The default setting is 5.
maximum entries-number
Maximum number of entries allowed in the CSG2 fragment database.
The range is from 1 to 65535. The default number of entries is 16384.
Release
Modification
12.4(11)MD
This command was introduced.
Command
Description
Server that answers user ID queries.
Specifies how long the CSG2 is to retain entries in the CSG2 User
Table.
Specifies the maximum number of entries allowed in he CSG2
User Table.