Cisco OL-15491-01 User Manual
Page 90
A-90
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg psd
Usage Guidelines
You must specify the PSD local port using the ip csg psd local-port command before you enter the ip
csg psd command.
Note
You can configure one and only one PSD for each CSG2.
Examples
The following example configures a PSD with IP address 1.2.3.4 and port number 7777, that uses VRF
table PSDVRF to communicate with the CSG2:
ip csg psd vrf PSDVRF 1.2.3.4 7777
Related Commands
Command
Description
Defines the delay interval, in seconds, before draining packets from the
Cisco Persistent Storage Device (PSD) when the Billing Mediation
Agent (BMA) becomes active.
Defines the number of packets to be drained from the Cisco Persistent
Storage Device (PSD) per drain delay interval when the Billing
Mediation Agent (BMA) becomes active.
Defines the Cisco Persistent Storage Device (PSD) keepalive time
interval for the CSG2.
Configures the local port on which the CSG2 communicates with the
Cisco Persistent Storage Device (PSD).
Specifies the maximum number of general packet radio service (GPRS)
tunneling protocol prime (GTP’) messages, beyond the size of the
Billing Mediation Agent (BMA) message queue, that the CSG2 can
buffer for the Cisco Persistent Storage Device (PSD).
Specifies the maximum number of general packet radio service (GPRS)
tunneling protocol prime (GTP’) messages, beyond the size of the
Billing Mediation Agent (BMA) message queue, that the CSG2 can
buffer for the Cisco Persistent Storage Device (PSD).
Defines the Cisco Persistent Storage Device (PSD) retransmit time
interval for the CSG2.
Defines the maximum number of Cisco Persistent Storage Device (PSD)
retries allowed before the CSG2 determines that the link has failed.
Defines the Cisco Persistent Storage Device (PSD) transmit window size
for the CSG2.