Cisco OL-15491-01 User Manual
Page 251
A-251
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
show ip csg
The following example displays detailed information about the subscriber at 10.18.28.0/24:
Router# show ip csg users 10.18.28.0/24 detail
10.18.28.11 C-10.18.28.11
sessions = 1, traffic proc id = 4
nexthop downlink ip = 0.0.0.0, flags = 0x00000001
nas =
idle = 10000, PoD = no
billing = PREPAID, plan = PERF, handoff timer OFF, idle timer OFF
bma: ip = 10.18.28.10, port = 3333
quota-server: ip = 0.0.0.0, port = 0
affinity state = OPEN
10.18.28.14 C-10.18.28.14
sessions = 1, traffic proc id = 4
nexthop downlink ip = 0.0.0.0, flags = 0x00000001
nas =
idle = 10000, PoD = no
billing = PREPAID, plan = PERF, hand
Related Commands
CSG_SSVC_STATE_CLOSING_ACK_NET_WAIT
The session has received a FIN-ACK or a
FIN and an ACK from the subscriber
interface and is waiting for the ACK from
the network interface to close the
connection.
Short timer.
CSG_SSVC_STATE_CLOSING_ACK_SUB_WAIT
The session has received a FIN-ACK or a
FIN and an ACK from the network interface
and is waiting for the ACK from the
subscriber interface to close the connection.
Short timer.
CSG_SSVC_STATE_CLOSED
The session is closed. Note that closed
sessions are destroyed so it is very unlikely
that show session will display a session in
this state.
1.
TCP sessions use all these states. UDP sessions move from INIT state directly to ESTAB state.
2.
“Short timer” indicates that the state uses a 5-second idle time regardless of what is configured in the content. All other states
use the configured idle time.
State
1
Description
Command
Description
Defines a CSG2 billing plan, and enters CSG2 billing
configuration mode.
Configures content for CSG2 services, and enters CSG2 content
configuration mode.