Meter exclude mms wap – Cisco OL-15491-01 User Manual
Page 188
A-188
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
meter exclude mms wap
meter exclude mms wap
To exclude bytes for a WAP 1.x Multimedia Messaging Service (MMS) session from the CSG2 usage
calculation, use the meter exclude mms wap command in CSG2 service configuration mode. To return
to the default behavior, use the no form of the command.
meter exclude mms wap
no meter exclude mms wap
Syntax Description
This command has no arguments or keywords.
Defaults
The default behavior is to include the MMS in the usage calculation.
Command Modes
CSG2 service configuration
Command History
Usage Guidelines
The meter exclude mms wap command and the basis second command in CSG2 service configuration
mode are mutually exclusive. If you configure the meter exclude mms wap command, do not configure
the basis second command.
Examples
The following example shows how to exclude the bytes for a WAP 1.x MMS session from the usage
calculation for the SERVICE-A service:
ip csg service SERVICE-A
meter exclude mms wap
Related Commands
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1: The meter exclude command split into three new
commands—meter exclude mms wap, meter exclude pause rtsp, and meter
exclude svc-idle.
Command
Description
Configures a CSG2 content billing service, and enters CSG2 service
configuration mode.
Excludes call control packets for a Session Initiation Protocol (SIP)
session from the CSG2 usage calculation.
meter exclude network-init
sip
Excludes incoming Session Initiation Protocol (SIP) transactions (that
is, those that are initiated from the network) from the CSG2 usage
calculation.