Ip csg iscsi profile – Cisco OL-15491-01 User Manual
Page 83
A-83
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg iscsi profile
ip csg iscsi profile
To specify the Internet Small Computer Systems Interface (iSCSI) target to be used as backup storage
for the CSG2, use the ip csg iscsi profile command in global configuration mode. To delete the iSCSI
target, use the no form of this command.
ip csg iscsi profile target-profile-name
no ip csg iscsi profile
Syntax Description
Defaults
No iSCSI target is specified.
Command Modes
Global configuration
Command History
Usage Guidelines
You can associate one and only one iSCSI target profile with each CSG2.
Examples
The following example shows how to specify CSG_BACKUP as the iSCSI target:
ip csg iscsi profile CSG_BACKUP
Related Commands
target-profile-name
Name of the iSCSI target profile to be used as backup storage.
Release
Modification
12.4(15)MD
This command was introduced.
Command
Description
Defines the delay interval, in seconds, before draining packets from
the Storage Area Network (SAN) connected to the Internet Small
Computer Systems Interface (iSCSI) when the Billing Mediation
Agent (BMA) becomes active.
Defines the number of packets to be drained from the Storage Area
Network (SAN) connected to the Internet Small Computer Systems
Interface (iSCSI) per drain delay interval when the Billing
Mediation Agent (BMA) becomes active.
Creates an iSCSI profile for an iSCSI target on the CSG2, and enters
iSCSI configuration mode.