Cisco OL-15491-01 - Manual (Page 147)

A-147
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg radius stop purge
ip csg radius stop purge
To specify the attribute that must be included in the RADIUS Accounting Stop request in order for the
CSG2 User Table entry to be deleted, use the ip csg radius stop purge command in global configuration
mode.
ip csg radius stop purge {radius-attribute-number | vsa {vendor-id | 3gpp}
radius-subattribute-number}
Syntax Description
Defaults The subscriber entry is deleted when a RADIUS Accounting Stop is received.
Command Modes Global configuration
Command History
Usage Guidelines The ip csg radius stop purge command specifies the attribute (which might be a VSA) that must be
included in the RADIUS Accounting Stop request in order for the CSG2 User Table entry to be deleted.
The contents of the specified attribute are not examined.
Examples The following example shows how to enable the ip csg radius stop purge command:
ip csg radius stop purge 44
radius-attribute-number Specifies the RADIUS attribute number. The range is from 1 to 255.
vsa Specifies the vendor-specific attribute (VSA).
vendor-id Specifies the vendor ID number. The range is from 1 to 16777215.
3gpp Specifies the Third Generation Partnership Project (3GPP) vendor
ID.
radius-subattribute-number Specifies the subattribute number. The range is from 1 to 255.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1:
• The name of this command changed from radius stop purge to ip csg radius stop
purge.
• The configuration mode for this command changed from module CSG
configuration to global configuration.
• The 26 keyword was removed.