Ip csg psd retransmit – Cisco OL-15491-01 User Manual
Page 97

A-97
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg psd retransmit
ip csg psd retransmit
To define the Cisco Persistent Storage Device (PSD) retransmit time interval for the CSG2, use the ip
csg psd retransmit command in global configuration mode. To reset the PSD retransmit timer to the
default value, use the no form of this command.
ip csg psd retransmit number-of-seconds
no ip csg psd retransmit
Syntax Description
Defaults
The default value is 4 seconds.
Command Modes
Global configuration
Command History
Usage Guidelines
We recommend that you change the retransmit time interval only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most
appropriate setting.
Examples
The following example shows how to specify a PSD retransmit time of 2 seconds:
ip csg psd retransmit 2
Related Commands
number-of-seconds
Time, in seconds, between PSD retransmits. The range is 1 to 65535. The
default value is 4.
Release
Modification
12.4(11)MD
This command was introduced.
Command
Description
Defines the Billing Mediation Agent (BMA) retransmit time
interval for the CSG2.
Defines the Interprocessor Communication (IPC) retransmit
time interval for the CSG2.
Configures a Cisco Persistent Storage Device (PSD).
ip csg quota-server retransmit
Defines the quota server retransmit time interval for the CSG2.