Cisco OL-15491-01 - Manual (Page 30)

A-30
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
debug ip csg
Command Modes Privileged EXEC
Command History
Usage Guidelines To see most but not all debugging output, use the all option to turn on all debugging flags, and then use
the no form of this command to exclude debugging output for any options that are not of interest to you.
Restrict the output of other CSG2 debugging commands to subscribers specified in the ACL.
Once the debug flags are set, they are automatically sent to the CSG2 cards when a configuration is
downloaded. Similarly, changes in the debug settings are sent to the CSG2 cards that are being debugged.
Generating debugging output for ACL (that is, configuring the acl keyword) disables all of the following
types of debugging:
• Configuration
• Error
• GTP
• IPC
• PSD
• RADIUS
• Replicate
• Statistics
• TLV
• UDB
You can use the show debug command to display the debug flag settings.
Note You must re-enter the debug command after every reload because it is not saved in the startup
configuration.
Examples The following example shows how to turn on debugging for rtsp and udb:
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1:
• The acl number, configuration sync, detail, dump, error, frag, global, ha,
http, interm, ipc, mail, other, packet, priority, qs, replicate, service, session
event, session state, stats, and vrf vrf-name, keywords and arguments were
added.
• The any, bma, ipc, psd, and quota-server keywords were added for the gtp
keyword.
• The agent, api, cpu, module number, quota, prepaid, record storage slot, and
timer keywords and arguments were removed.
12.4(15)MD The crashinfo, ftp, iscsi, mail, and sip keywords were added.