Cisco OL-15491-01 - Manual (Page 179)

A-179
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
match method
match method
To specify a method match pattern for a CSG2 billing map, use the match method command in CSG2
map configuration mode. To delete the match pattern, use the no form of this command.
match method method-name
no match method method-name
Syntax Description
Defaults None.
Command Modes CSG2 map configuration
Command History
Usage Guidelines This command is valid only for HTTP and SIP.
You can use more than one match method command in CSG2 map configuration mode to specify
multiple method match patterns for a method map:
• If a flow matches any of a map’s method match patterns, then the CSG2 accepts and processes the
flow (unless another map associated with the flow does not match, of course).
• If a flow does not match any of a map’s method match patterns, then the match fails and the CSG2
does not accept or process the flow.
method-name Method to be matched. Valid methods are:
• connect—HTTP CONNECT method
• get —HTTP GET method
• head—HTTP HEAD method
• invite—SIP INVITE method
• message—SIP MESSAGE method
• notify—SIP NOTIFY method
• options—SIP OPTIONS method
• post—HTTP POST method
• register—SIP REGISTER method
• subscribe—SIP SUBSCRIBE method
• Any other extension method name of 1 to 15 characters
Release Modification
12.4(11)MD This command was introduced.
12.4(15)MD Support for Session Initiation Protocol (SIP) methods was added.