Cisco OL-15491-01 - Manual (Page 221)

A-221
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
reauthorization threshold
reauthorization threshold
To configure the CSG2 reauthorization threshold, use the reauthorization threshold command in CSG2
service configuration mode. To restore the default setting, use the no form of this command.
reauthorization threshold threshold
no reauthorization threshold
Syntax Description
Defaults For fixed-cost billing (basis fixed) or volume-based billing (basis byte), the default reauthorization
threshold is 10000000 quadrans.
For duration-based billing (basis second), the default reauthorization threshold is 10 seconds.
Command Modes CSG2 service configuration
Command History
Usage Guidelines Setting the threshold to 0 means that reauthorization is triggered when there are no remaining quadrans
or seconds. The quota server can override these settings.
For services configured for fixed-cost billing (basis fixed), the reauthorization trigger is the smaller of
the following values:
• The threshold configured using the reauthorization threshold command
• 25% of the last quota grant returned from the quota server
For services configured for volume-based billing (basis byte), the reauthorization trigger is the smaller
of the following values:
• The threshold configured using the reauthorization threshold command
• 32 KB or 25% of the last quota grant returned from the quota server, whichever is larger
For services configured for duration-based billing (basis second), the reauthorization trigger is the
threshold configured using the reauthorization threshold command.
threshold Number of remaining quadrans or seconds to trigger
reauthorization.
• For fixed-cost billing (basis fixed) or volume-based billing
(basis byte), the range (in quadrans) is from 0 to 10000000.
The default is 10000000.
• For duration-based billing (basis second), the range (in
seconds) is from 0 to 10000000. The default is 10.
Release Modification
12.4(11)MD This command was introduced.