Cisco OL-15491-01 User Manual
Page 71
A-71
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg entries user idle
•
If Connection Duration Billing is enabled, you can use either the billing plan entry idle timer or the
global entry idle timer to release a subscriber connection.
•
The idle timer does not affect sticky user entries.
Examples
The following example shows how to specify a CSG2 User Table entry idle time of 86,400 seconds:
ip csg entries user idle 86400
Related Commands
Command
Description
Sets the time after which entries for idle subscribers are deleted
from the CSG2 User Table.
Server that answers user ID queries.
Defines the maximum number of entries in the CSG2 fragment
database, or how long the CSG2 is to retain the entries.
Specifies the maximum number of entries allowed in he CSG2
User Table.
Specifies the location from which the CSG2 is to obtain the
subscriber profile and billing plan when generating entries for the
CSG2 User Table.
ip csg entries session user max
Specifies the maximum number of entries allowed in the CSG2
session table.
Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages, beyond the
size of the Billing Mediation Agent (BMA) message queue, that
the CSG2 can buffer for the Cisco Persistent Storage Device
(PSD).
Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages that the CSG2
can buffer for all quota servers.