Content (csg2 service) – Cisco OL-15491-01 User Manual
Page 25

A-25
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
content (CSG2 service)
content (CSG2 service)
To configure a content and policy as a member of a CSG2 billing service, and optionally to assign a
weight to this content, use the content command in CSG2 service configuration mode. To remove a
content name from the billing service, use the no form of this command.
content content-name policy policy-name [weight weight-value]
no content content-name policy policy-name
Syntax Description
Defaults
The default weight-value is 1 quadran.
Command Modes
CSG2 service configuration
Command History
Usage Guidelines
You must configure a policy before configuring this command.
Content can reference more than one policy. Therefore, you can have multiple content commands with
the same content-name argument, but different policy-name arguments.
To make a specific content free, specify a weight-value of 0.
Each content billing service is associated with one or more contents and policies.
Multiple services can include the same content/policy pair, as long as the services are not associated with
the same billing plan. They cannot be associated with the same billing plan because then the match of
content/policy pair to service would not be unique.
content-name
Name of the content for this service. The name can be from 1 to 15
characters long, and can include uppercase or lowercase letters (the CSG2
changes all letters to uppercase), numbers, and any special characters.
policy policy-name
Name of a configured policy to apply to the content for this service.
weight weight-value
(Optional) Number of quadrans to deduct for each transaction. The range is
from 0 to 32767. The default weight-value is 1 quadran.
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1: The weight-name argument was replaced with the
weight-value argument.